//DGD1016ABP-62X96 RH
Sold Out

DGD1016ABP-62X96 RH

$4,020.00 $3,250.00

Out of stock

  • Size: 62″x96″

  • Door Opening: Right In swing

  • Color: Dark Bronze

  • Glass: Aquatex Tempered

  • Handle: Not Included

Colors Code Glass Name Door Details

Installation Manual

Out of stock

Description

DOOR SPECIFICATIONS

1. 12 GAUGE, STANDARD DOOR JAMB IS 2″ X 6″ WIDTHS IN 2.5 MM TUBE.
2. DOOR SHEET IS MADE OF 2″ X 6″ 2.5 MM TUBE.
3. OUR SCROLL WORK IS HAND FORGED USING 5/8″ SOLID IRON.
4. THE DOORS COME ON A PRE-HUNG STEEL FRAME. THE STEEL FRAME SUPPORTS THE WEIGHT OF THE DOORS AND ALLOWS EASY INSTALLATION. THE FRAME IS EQUIPPED WITH MOUNTING FLANGES TO SECURE THE FRAME INTO THE FRAMING WITH LAG BOLTS.READ MORE

Reviews

There are no reviews yet.

Be the first to review “DGD1016ABP-62X96 RH”

Your email address will not be published. Required fields are marked *

19 − 1 =

INSTALLATION MANUAL

1. Check Rough Openings:
* Measure the rough opening. It must be at least 1” wider and 1” taller than the metal jamb, using perfectly level triple 2 x 6 studs all the way around the perimeter.
* Make sure the studs surrounding the perimeter are perfectly level. If they are not, ask the Builder or Framer to correct them as much as possible. The better the studs are    leveled, the easier the installation will be.
2. Check the floor level:
* Our Doors have a 1-9/16” above concrete level threshold preparation. This allows for a 1-3/16” threshold and ½”sweep. This preparation will clear any floor thickness up    to ¾”. If the floor is already installed please measure your rough opening height from the top on the finished floor to your header. Please keep in mind that the jamb and    threshold will be installed on top of the finished floor.
* Floor heights may vary so take this into consideration when measuring your rough opening. If the flooring is taller than ¾” please specify the floor height when placing      the order.
3. Center the Jamb:
* Install the frame in the rough opening from the inside of the house out. The frame should be centered within the existing rough opening.
4. Level The Jamb:
* Check the Level of the level of the studs and flooring along X, Y, and Z axis. Plan ahead for how you are going to level the jamb according to the walls.
* First screw the top two holes on the upper right and left side of the jamb into the studs.
* Make sure the jamb is level and screw the two holes on the bottom right and left side of the jamb.
5. Hang Doors:
* Hang the doors on top of the pins on the welded hinge
* DO NOT hit the hinges and try to force the doors and pins to fit.
6. Correct Alignment:
* Check the gap alignment (horizontally and vertically) between the doors and the door and jamb when the doors are closed.
* If there are variations in the gaps, loosen the screws. Adjust alignment as needed.
* Once all gaps are aligned tighten screws.
* Once everything is perfectly level and aligned put all screws in the holes.

INSTALLATION MANUAL

1. Check Rough Openings:
* Measure the rough opening. It must be at least 1” wider and 1” taller than the metal jamb, using perfectly level triple 2 x 6 studs all the way around the perimeter.
* Make sure the studs surrounding the perimeter are perfectly level. If they are not, ask the Builder or Framer to correct them as much as possible. The better the studs are    leveled, the easier the installation will be.
2. Check the floor level:
* Our Doors have a 1-9/16” above concrete level threshold preparation. This allows for a 1-3/16” threshold and ½”sweep. This preparation will clear any floor thickness up    to ¾”. If the floor is already installed please measure your rough opening height from the top on the finished floor to your header. Please keep in mind that the jamb and    threshold will be installed on top of the finished floor.
* Floor heights may vary so take this into consideration when measuring your rough opening. If the flooring is taller than ¾” please specify the floor height when placing      the order.
3. Center the Jamb:
* Install the frame in the rough opening from the inside of the house out. The frame should be centered within the existing rough opening.
4. Level The Jamb:
* Check the Level of the level of the studs and flooring along X, Y, and Z axis. Plan ahead for how you are going to level the jamb according to the walls.
* First screw the top two holes on the upper right and left side of the jamb into the studs.
* Make sure the jamb is level and screw the two holes on the bottom right and left side of the jamb.
5. Hang Doors:
* Hang the doors on top of the pins on the welded hinge
* DO NOT hit the hinges and try to force the doors and pins to fit.
6. Correct Alignment:
* Check the gap alignment (horizontally and vertically) between the doors and the door and jamb when the doors are closed.
* If there are variations in the gaps, loosen the screws. Adjust alignment as needed.
* Once all gaps are aligned tighten screws.
* Once everything is perfectly level and aligned put all screws in the holes.